Brockton, MA Mold Damage Remediation

Overcoming Mold Growth in Your Brockton Home 

Mold can be one of the underrated threats for a Brockton residence because many homeowners mistakenly believe that the condition comes and goes. Moist and damp areas of your property can often facilitate the growth and spread of mold colonies, making it vital to inspect low-traffic areas of your home regularly. Catching colonization in earlier stages can often reduce the time and money involved in remediation and prevent the organism from spreading far beyond this origin point. 

Mold Removal vs. Mold Remediation 

Many area companies might tell you that they can remove all the mold in your Brocktonhome, but this is a misleading statement. No one can remove all of the molds in your property because spores exist naturally in almost every environment. It is only under specific conditions that these spores can sit into hosting materials and become a threat. Once colonization begins, remediation strategies exist to remove these active organisms. Our professionals have multiple strategies for removing colonies, including: 

  • Soda/Media Blasting
  • Sanding Surfaces
  • Antimicrobial Product Treatment 
  • Abrasive Surface Cleaning
  • Controlled Demolition

Mold-Damaged Contents in Your Residence 

As colonies spread, your personal belongings might be impacted by the organism. We have effective content management solutions to offer on-site and off-site recovery efforts, from surface cleaning and antimicrobial treatments to more complex drying and deodorization efforts. In our SERVPRO facility, your belongings are in the best care, stored in a climate-controlled warehouse until remediation completes. 

SERVPRO of Stoughton, Brockton

If You See Signs of Mold, Call Us Today – (508) 690-4690

Understanding Mold

Microscopic mold spores exist almost everywhere, outdoors and indoors, making it impossible to remove all mold from a home or business. Some restoration businesses advertise “mold removal” and even guarantee to remove all mold, which is a fallacy. Consider the following mold facts:

  • Mold is present almost everywhere, indoors and outdoors.
  • Mold spores are microscopic and float along in the air, and may enter your home through windows, doors, or AC/heating systems or even hitch a ride indoors on your clothing or on a pet.
  • Mold spores thrive on moisture. Mold spores can quickly grow into colonies when exposed to water. These colonies may produce allergens, irritants, and toxins. 
  • Before mold remediation can begin, any sources of water or moisture must be addressed. Otherwise, the mold may return. 
  • Mold often produces a strong, musty odor and can lead you to possible mold problem areas.
  • Even higher-than-normal indoor humidity can support mold growth. Keep indoor humidity below 45 percent.

Faster to Any Size Fire Disaster

A minor mold problem can quickly become a major infestation if left untreated. We can start the remediation process immediately after you contact us. A faster response lessens the mold damage, limits additional damage, and reduces the remediation cost.

Locally Owned, with National Resources

We live and work in this community too; we might even be neighbors. As a locally owned and operated business, SERVPRO of Stoughton, Brockton is close by and ready to respond to your mold damage emergency. We are proud to be an active member of the Brockton community and want to pitch in and help make our community the best it can be.

We proudly serve Brockton, MA, Abington, MA, and surrounding areas.

Highly Trained Water and Mold Restoration Specialists

As water and mold damage specialists, we have the experience, the expertise, and the advanced training that enables us to get your property restored quickly and thoroughly. Learn about our water and mold training and certificates.

The Mold Remediation Process

Every mold damage scenario is different and requires a unique solution, but the general mold remediation process stays the same. The steps listed below illustrate our “typical” process:

Step 1: Emergency Contact - (508) 690-4690

We’re available 24 hours, 7 days a week to answer your phone call. Our consultant will guide you through this process, asking questions that will allow us to better understand your situation and to determine the needed equipment and personnel.

Step 2: Inspection and Mold Damage Assessment

We determine the scope of the mold damage by carefully inspecting your property for visible signs of mold. Since mold can be hidden, we use various technologies to detect mold and hidden water sources. 

Step 3: Mold Containment

To keep the mold spores from spreading further, we will use various mold containment procedures. Our professionals may use physical barriers and negative air pressure to isolate the contaminated area and to help prevent the mold spores from spreading through your Brockton, MA home or business. Also, we’ll turn off the property’s fans and heating and cooling systems to prevent the spread of mold.

Step 4: Air Filtration

We use powerful air scrubbers, HEPA vacuums, and other filtration equipment to remove microscopic mold spores out of the air. This air filtration process and our mold containment process help to prevent the spread of these mold spores while the mold remediation is in process.

Step 5: Removing Mold and Mold-Infested Materials

The mold remediation process depends on the amount of mold growth and the types of surfaces on which the mold appears. We’ll use antifungal and antimicrobial treatments to eliminate mold colonies and to help prevent new colonies from forming. It may be necessary to remove and dispose of mold-infested porous materials, like drywall and carpeting, to remediate heavy mold growth.

Step 6: Cleaning Contents and Sanitizing

We clean your furniture, decorative items, curtains, clothing, and other restorable items affected by mold, using a variety of cleaning techniques to clean and disinfect your belongings. We’re also trained to remove odors and provide deodorization using fogging equipment.

Step 7: Restoration

During the remediation process, it’s often necessary to remove porous building materials like subfloors, drywall, and carpet. The restoration step returns your Brockton, MA home or business back to normal. Depending on the severity of mold damage, the restoration step may involve minor repairs, such as replacing drywall, or it may involve a substantial reconstruction project.

SERVPRO knows Mold

In Brockton, MA, SERVPRO of Stoughton, Brockton is ready to tackle and resolve any mold issues that arise. SERVPRO professionals understand the anxiety that can happen when a homeowner uncovers mold. Let us help put your worries to rest. Our knowledgeable crew is ready with the gear needed to tackle any mold job. Reach us at (508) 690-4690 - We’re ready to activate our team to remediate your mold.